Automatic Tensile Elongation Strength Testing Machine

Automatic Tensile Elongation Strength Testing Machine

product description

Rubber Elongation Testing Machine

is widely used to test tension, tear strength, peeling force,compression, shearing force, adhesion, three-point bending, etc.Which is widely used in the field of metal ,rubber ,plastic ,nylon ,leather ,shoemaking ,fabric ,insulator ,electric appliance,automobile ,etc. And it is equipped  with build-in printer.

This machine adopts the electronic tensile meter, use the motor to make displacement of the fixture.

Place the fixture with sample between the upper and lower fixture, use a given speed to pull the upper fixture

upward, and the upper load cell with sensor the tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be

displayed automatically.

Rubber Elongation Testing Machine

 The main technical parameters:

Capacity: 50,100,200kg, 500kg, 1T, 2T

Units: gf,kgf,  N,  LBf, W,  KN,  T
Load Resolution: 1/100,000
Load Accuracy : within ±0.5% 
Stroke: 1000mm (excluding fixture)
Test speed: (0.1-500)mm/min(adjustable)
Dimension: (L×W×H) 983×603×1540mm
Accuracy of the displacement: 0.001mm  

Weight: 150kg

Power: single phase,220V  3A

Motor: Servo Motor

Driver: high presice ball screw

Accessories: One set of fixture, one computer

Specification of main engine

A, Motor system: Panasonic servo motor +Panasonic servo driver +ball screw (Taiwan)+Leeming reduction gears +synchronous belt drive

B, Control system: a, TM2101 computer servo system, b, Back to origin automatically after the test, c, store data  

automatically or by manual operation 

C, Data transmission: RS232 

D,Computer servo system: Desktop computer servo control tensile tester dedicated system

E, Display modes: Windows Interface display

F, Convenient full gear and precise full six gears calibration of the system of linear double strength

G, Using windows interface to test software it can achieve to set speed, load, power time, Breakpoint proportion ,much 

order control mode and meet different test requirement.

H, Whole displacement: encoder (2500P/R), ascending 4 times precision

I, Displacement resolution: 0.001mm

J, Safety device: overload emergency stop device, fluctuation travel limit device, leakage automatic broken electricity 

system, automatic breakpoint stop function

Features:

1. It adopts windows format, the setting of parameter is in dialog box.

2. The software is with three languages: simple Chinese, Traditional Chinese and English.

3. You can set the report format as you like; And you can choose to see the curve between time and displacement, strength and displacement and time and strength.

 4. It has several measuring units, and can be changed.

5. It has the function of automatic returning and calibration; testing function of sampling automatically and manually; function of automatic magnifying to reach 

A graphic with suitable size.

6. The testing speed can be customized by requirements.

7. It has the functions of defining testing method automatically and calculating.

8. It can generate testing report automatically, and print out in A4 paper with curve or save in word format.

 Theory:

This machine adopts the material tensile meter, use the motor to make displacement of the fixture.

Place the fixture with sample between the upper and lower fixture, use a given speed to pull the upper fixture

upward, and the upper load cell with sensor the tensile strength, and convert the strength into voltage sign and

output to the display screen. And the strength value will be displayed automatically.

Software

ASTM D903,GB/T16491,GB/T1040,GB/T8808,GB13022,GB/T 2790/2791/2792,CNS-11888,JIS K6854, 
PSTC-7.

The TM2101 measurement and control system is designed purposely for microcomputer controlled electronic

universal testing machine, microcomputer controlled universal hydraulic testing machine and microcomputer

controlled compress testing machine, used for the test of tension, compress, bend, shear, tearing and peel. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate

multiple parameters, i.e. maximum force, yield strength, average peel force, maximum deformation, yielding point

and elastic modulus; this system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function.

Click here to get more detail: https://haidaequipment.en.made-in-china.com/product/JqoQKhPvCZcn/China-Electronic-PC-Display-Wire-Tensile-Testing-Equipment.html