1:1 Fiber Line Protection Switch

JRD Data: JRD-OPS-1U-1:1 Fiber-Link Protection System

Features:
Apply to 1:1 protection
Real-time monitoring the operating route
Instantaneous switch<35ms, without interrupting the communication
Insertion loss<1.5dB
To check and control the working device through the RJ45 and RS232 connector with the management software
Dual power supply and power-fail protection is more secure
Data transparency
With LCD display and controlling panel

Application:
PDH, SDH linear protection system
DWDM linear protection system
Electrical power communication
linear protection system
CATV linear network protection system

SUN-OPS-1U-1:1 is mainly used in protecting the optical route with less loss redundancy. Using the switch module
to do the route selection at the sending end,then the light signal can only transmit through the selected route or the secondary route, which differs from 1+1 transmits through both routes at the same time. So does the receiving end in order to make sure that the sending route keeps in step with the receiving route when the switching happens.

Parameters Unit 1:1
Wavelength Range nm 1310±50nm & 1550±50nm
Control Range dBm +23~-50
Control Accuracy dB ±0.25
Resolution dB ±0.01
Return Loss dB ≥55
PDL dB ≤0.05
WDL dB ≤0.1
Optical Connector LC/PC
Size 1U: 19”
Power Voltage V DC(36-72)V & AC(85-264)V/50~60Hz,dual power supply
Power-down Condition To remain or switch to the secondary line
Quantity Per Month: 1000
Delivery Way - Date Of Delivery: 15 days