Jiashan Jinchang Electron Co. Ltd., China
Home > Products > Antennas for Communications > GPS Internal Active Antenna

GPS Internal Active Antenna

— GPS Internal Active Antenna, GPS antenna, GPS Internal Antenna
Product Category: Antennas for Communications
Sales Method: Export, Manufacture, Wholesale, OEM/ODM
Payment Term: T/T
Min. Order Unit Price
100PCS
Contact Info

Mrs.Christina Liu

Address: China (mainland) Zhejiang Jiaxing,Factory adress: 398#,Zhenye Road, South Street, Jiaxing, Zhejiang, China

Product Detail

Product Attribute:

  • China (mainland) More >
  • JCN055
  • Jiashan Jinchang
  • 12/28/2011
  • 12/29/2011

Additional Info.:

  • FOB:Shanghai port or others

Product Content Description:

1 Center Frequency: 1575.42 MHz ± 3 MHz
2 Band Width: ±4 MHz ± 1 MHz
3 V.S.W.R(in BW): 1.5:1
4 Gain(Zenith): 0 dB ± 0.5 dB
5 Polarization: RHCP
6 Impedance: 50 Ω



LNA/Filter
1 LNA Gain: 20±2 dB ± 2.5 dB
2 Noise Figure: 1.5 dB
3 Filter Out Band Attenuation: 30dB Min f0+40MHz
30dB Min f0-40MHz
40dB Min f0+100MHz
35dB Min f0-100MHz

4 DC Voltage: 3.3 V
5 DC Current: 9mA


Mechanical
1 Cable: RF1.13 or others
2 Connector: IPEX or others
3 Mounting: Internal


Reliability
Condition:Temperature: 40±5 ℃
Load: DC=5V±0.5 V
Quantity: 2000pcs
Sustained Time: 48h

Environmental Specifications
Post Environmental Tolerance (Refer to the form 1~2 )
Condition: Temperature range 25±3℃
Relative Humidity range 55~75%RH
Operating Temperature range -40℃~+85℃
Storage Temperature range -40℃~+85℃

Moisture Proof
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40±2℃and the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.

Vibration Resist
The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions.

Drop Shock
The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.

High Temperature Endurance
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80±5℃for 24±2 hours and 1~2 hours recovery time under normal temperature.

Low Temperature Endurance
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40℃±5℃for 24±2 hours and to 2 hours recovery time under normal temperature.

Temperature Cycle Test
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25℃ and high temperature +85℃ for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.
Quantity Per Month: 200,000
Delivery Way - Date Of Delivery: Within 10 work days after payment

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.

Browse

- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB