Zhongshan Jindong Machinery Co. Ltd.
Home > Products > Plastic Processing Machines > 1.5L Full-Automatic Pet Bottle Blow Molding Machine

1.5L Full-Automatic Pet Bottle Blow Molding Machine

— bottle molding machine, bottle blow molding machine for 1.5L, blow molding machine for pet bottle
Product Category: Plastic Processing Machines
Sales Method: Manufacture
Payment Term: T/T
Min. Order Unit Price
1 set
Contact Info

Mrs.vivi shui

Address: China (mainland) Guangdong Zhongshan,Gate 1 NO.5 Futian 5th Road Shite industrial zone Gangkou Town

Product Detail

Product Attribute:

  • China (mainland) More >
  • JD-06D
  • JINDONG
  • 04/01/2012
  • 04/02/2012

Additional Info.:

  • sea-shenzhen zhongshan
  • wooden carton

Product Content Description:

JD-06D Main technical parameters

Composition
Project
Technical parameters

Products conditions
Products maximum volume(ml)
1500ml

Products maximum diameter (MM)
Φ90

Products size bottle (MM)
Φ12 ~ Φ38

Products maximum height(MM)
<320

Suitable for embryo tube maximum height (MM)
<150

Shut the mould trip
110mm

Bottom-formwork trip
50mm

Bottle spacing (MM)
95.25

Mouldstandardthickness (MM)
190

Production capacity (bottles/hour)
5,600~6,000

Mold cavity number
6

Heating part
Heating unit
4

Heating lamp layer
8

Germ tubes seat number (a)
114

Electrical parameters
Voltage
220/380V

Frequency
50/60Hz

Use power
32~38.4kw/h

Installed power
67kw

Air

(High-pressure gas consumption PET bottle volume on and calm)
Low voltage compressed air pressure
8~10bar

Low voltage compressed air gas consumption
2.0~3.0m3/min

High-pressure compressde air pressuue
26~35bar

High-pressure compressed air gas consumption
3.6~4.2m3/min

Cooling water
Pressure
3~4bar

Cooling water (temperature≤18°C)
Temperature
8m3/h

Weight
Host\Heating machine\Body,etc
5.5t

Equipment configuration dimensions
Sixe (L×W×H)
5350mm×2090mm×2300mm

Richard embryo machine (L×W×H)
2700mm×1550mm×2620mm
PLC Siemens
Touch screen Siemens
Cylinder SMC
HP blowing valve Parker
Electric Switches Schneider
Servo motor Mitsubishi
Magnetic Touch screen alve FESTO
Heating type Infrared ray
Mould design Available
All of the electrical components adopts CE,CCC,ISO approved international advanced-tech products
Main Features:
1 ,Adopt automatic transmission control method to reduce staff, reduce costs, improve quality and profit and increase profits provide a guarantee.
2, We used imported man-machine interface control to make sure it has performance accuracy, strong stability, easy operation.
3, Detection devices made of imported components, high control precision, fast response.
4, We adopted infrared lamp heat, so the penetration, uniform heating, 40% electricity savings. The reflector width and height can be adjusted for different structures of the performs can be heated.
5, With automatic alarm and automatic fault detection to determine function.

6, We chose and used Germany, Japan, U.S.A, France, pneumatic components to make sure our product with high sensitivity and switching speed, low failure rate, safe and reliable operation.
7, The air route design: Action and blowing into two parts, to meet the blow, the action of different air pressure requirements for high pressure blowing products.
8, The unique clamping structure has strong clamping power. It is smooth, fast opening and closing mold, easy installation and replacement for mould.
9, the most critical is that we have a good after-sales service.
Quantity Per Month: 28
Delivery Way - Date Of Delivery: 45~60 working days

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.

Browse

- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB