Jinan Always Machinery Co. LTD

Pulp Pump

— Half-open impeller, Don't block, Electric drive
Product Category: Paper Product Making Machines
Sales Method: Export
Payment Term: T/T, L/C
Trade Term (Incoterms): FOB
Min. Order Unit Price
1 Piece
Contact Info


Address: China (mainland) Shandong Jinan,Dinghao Plaza, High-Tech Zone

Product Detail

Product Attribute:

  • China (mainland) More >
  • BP
  • 08/21/2017
  • 08/22/2017

Product Content Description:

Impeller structure: semi-open impeller

UHB - ZK corrosion resistant mortar pump is a single-stage single-suction cantilever type centrifugal pump, the company is specifically designed for power plant flue gas desulfurization and sewage treatment project design and development, the pump adopts the steel lining ultra-high molecular weight polyethylene (uhmw-pe), which has very good corrosion resistance and good wear resistance. This pump is widely used in the temperature is below 100 degrees, the solid content (hard soft particles unlimited) not more than 40% of any concentration of acid, alkali and salt (including chloride medium) strong oxidant, organic solvents, such as the medium of transmission, can completely replace the imported products, is used for flue gas desulfurization plants or all kinds of chemical enterprise environmental protection standard of an ideal special pump.

Product features:

The uhb-zk series of anti-corrosion resistant mortar pump is a kind of pump which can adapt to various conditions, such as conveying acid, alkaline cleaning liquid or slurry. Various corrosive minerals in the smelting industry; A variety of dilute acids in the sulfuric acid industry; Environmental protection industry all kinds of sewage and so on. The pump is corrosion-resistant and wear-resistant and is widely used. It has the following characteristics:

1) strong wear resistance, flow components are all made of steel lining ultra-high molecular weight polyethylene (uhmw-pe) manufacturing, ultra-high molecular weight polyethylene (uhmw-pe) wear resistance among the top of the plastic, than nylon 66 (PA66), polytetrafluoroethylene (PTFE) 4 times, is carbon steel, stainless steel wear resistance of 7 to 10 times.

2) a strong resistance to impact, the impact strength of ultra-high molecular weight polyethylene first on the list of general engineering plastics is (acrylonitrile/butadiene/styrene copolymer (ABS) five times, and can maintain stability under 196 ℃ below zero, it is not by any other plastic feature.

3) excellent corrosion resistance: the pump in a certain temperature and the concentration range can all kinds of corrosive medium (acid), alkali, salt and organic solvents, at 20 ℃ and 90 ℃ for 80 kinds of organic solvent impregnated 30 d. There was no abnormality in appearance, and there was little change in other physical properties.

4) noiseless: the high molecular weight polyethylene impact energy absorption is the highest in plastic, and the sound absorption is good, thus minimizing the noise caused by liquid flow during conveying.

5) safe and reliable, no toxin decomposition: the pump adopts uhmw-pe high molecular weight polyethylene (uhmw-pe), which is extremely stable and therefore suitable for use in the food industry.

6) low friction coefficient: the internal friction of the pump is only 0.07-0.11, so it is self-lubricating. Under water lubrication, the coefficient of friction is half as low as that of PA66 and POM. It is better to lubricate than steel and brass when working in sliding or rotating forms.

7) good adhesion: high molecular weight polyethylene (uhmw-pe) is very resistant to adhesion, and the anti-adhesion ability is similar to PTFE, so it is also outstanding in conveying some of the more viscous medium. 

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.


- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB