Home > Products > Electronic Production Machinery/n.e.s. > Router PCB Separator Milling PCB Cutting Machine PCB Depanelizer,CW-F04

Router PCB Separator Milling PCB Cutting Machine PCB Depanelizer,CW-F04

— Router, PCB Separator, Milling PCB
Product Category: Electronic Production Machinery/n.e.s.
Sales Method: Export, Manufacture, Wholesale, OEM/ODM, Service, Retail
Payment Term: T/T, L/C, M/T, D/D, Check, D/P sight, Western Union
Trade Term (Incoterms): EXW, FCA, FAS, FOB, CFR, CIF, CPT, CIP, DAT, DAP, DDP
Min. Order Unit Price
1 Piece USD 5000 / Piece
1 Piece USD 5000 / Piece
Contact Info


Address: China (mainland) Guangdong Shenzhen,Fuyong Chongqing Road Baoan District

Product Detail

Product Attribute:

  • China (mainland) More >
  • CW-F04
  • ChuangWei
  • CE Approval ISO9001
  • 1000mm*940mm *1520 mm
  • white
  • 09/04/2018
  • 09/04/2018

Product Content Description:

  Product Introduction:
It is a stand alone router machine specially designed to route (depanelize) printed circuit board assemblies (PCBA) into individual assemblies. The machine can accomodate larger PCBs in its two table configuration with maximum panel size of 650mm x 500mm. Its advanced control software provides user friendly "visual" programming for rapid and accurate online programming.

  Product Key Feature:

      *Solution for stress free depanelization
      *Fixture-based highly efficient dust vacuum system
      *Clean and precise depanelization for densely populated PCBs
      *Advanced image-processing software offers point-and-click operation for programming router paths
      *Automatic alignment compensation by CCD camera
      *User-friendly operation
      *Extended bit life by automatic router bit depth adjustment
      *Improved tact time
      *Low maintenance required
      *Reasonable price
      *Calibration free linear robot


Model CW-F04
Standard working area 320*320mm
Power 220V, 4.2KW
Manipulator Repeatability ±0.02mm
Resolution ±0.01mm
Board Positioning Dual workstation with nest fixture or pin fixture
Panel Location Located by tooling holes or edges of PCB
Loading Manual
Unloading Manual
Panel Size 320*320mm(standard)
Panel Thickness 0.5-3.5mm
Spindle motor KAVO Spindle
Tool Change Manual
Dust filtration system 3KW Vacuum Cleaner
Vision system High resolution CCD video camera
Programming Vision assisted point to point manual teaching
Editing Function Dry run vision assisted / test run mode
Machine weight 500kgs
Machine dimension 113*140*108cm

  Product Detail:

 CE Certification:

 Business Partners From Different Lines:



   Our Best Service:
1. We supply a wide range of products and provide one-stop service for Electronic Assembly Industry.
2. We can also customize the products to fulfill different requirements.
3. We are a leading manufacturer of ESD Products, Cleanroom Products, Tools & Instruments for
Electronic Assembly Industry.
4. We keep a lot of stock for regular products and we can support small orders. Usually, our lead time
is just 3 days.
5. Credibility: We are the 6th year Alibaba Gold Supplier. Our customers are located all over the world.
6. Gratitude: We cherish and feel grateful to every customer for the business you give us. We are your
reliable partner and will return to you with good products and good support.
7. Professional: We have been in this business for more than 10 years. We have a strong professional
team with various experiences.
8. We keep doing new product development. Our goal is to enhance our competitive capacity constantly.
9. Promise: we are always ready to shoulder the responsibility if any loss caused to our customer due
to our mistakes

1. - I see according to the specification there may be up to 1000 files. How many joints can we have per file? I need to know the programing limitation of the machine.
R: No limit on the joints per each program. More than 1000 files.
2. - Can you send me user manual of the robot? I need to see the programing abilites. I need to know every parameter we can set for every joint.
R: We will offer the instruction manual when delivery, don't worry about that.
3. - Also where are stored the programs - in the robot or in memory card?
R: The programs are stored in the robot.
4. - What is the teaching pedant for besides programing? Can I copy soldering programs to another robot CWDH-411?
R: Yes, program can be copied from 1 robot to another robot.
In generally, each PCB has 1 program with hundreds of joints.
There are total 144M storage, 100000 joints take 3M.
If there are 1000 joints per each program, the robot could store 4800 files.
5. - Is it possible to start the program from particular joint (not from the begining but for example from 5th joint)?
R: Yes, you could start from particular joint.
6. - Is it possible to execute only one joint?
R: Yes, it is OK.
7. - Is it possible to set X, Y, Z offest for every joint? What I mean is if the soldering tip can be set in the way it comes into the joint under some angle?
R: Yes, you could set offset, solder paste capacity, soldering time for every joint.
8. - Is it possible to set the tip to come out from the joint under angle as well?
R: Yes, no problem.
9. - Can I set feeding/backing speed for every joint?
R: Yes, you could set the soldering time for every joint.
10. - I didn't see how much power is the soldering heater (I can only see the total machine is 2300Watts)?
R: It is 150W.
11. - Also what is so powerful in the robot so it is 2300 watts? Our current robot is 600 Watts total power and it is almost the same. The soldering tip is 400 Watts and it has PC inside. So I expect the motors to be no more 150 Watts totally. But here we have 2300 Watts? I am just curious what is so powerful?
R: The machine is total 750W, including the soldering heater 150W.
12. - Do we need air for the machine and if so how much?
R: Yes, need air. In generally, it works by 2-3 kg/c. Do you have an air pump in your factory? If yes, it is enough, because standard industrial air pump has 6-7 kg/c.
13. - Also do you have soldering tip like below (this is what we use right now)?
R: Yes, we could custom make according to your soldering requirements based on your PCB if we don't have exciting tips.
14. - I forgot to ask you also if it is possible to program arrays with the robot.
R: Yes, it is ok to program arrays.
15.-What is the speed for x-y movement?
R: X/Y axis is 600mm/s, max speed for Z axis is 400mm/s

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.


- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB