Xiamen Fuyin Machinery Co., Ltd.
Home > Products > Plastic Laminating Machines > OPP Laminator Machine

OPP Laminator Machine

— U. V And OPP Laminator, 126W
Product Category: Plastic Laminating Machines
Sales Method: Export, Manufacture
Min. Order Unit Price
Contact Info

Mrs.Sandy

Address: China (mainland) Fujian Xiamen,Flat D. 11/F Taiwanese Merchant Hall NO. 860 Xianyue Road Huli Xiamen China

Product Detail

Product Attribute:

  • China (mainland) More >
  • 03/24/2015
  • 03/25/2015

Product Content Description:

Basic Introduction
This machine combines all the features of water-based and oil-based laminators and can be used for both type of coating application. It applies environmental-protecting water-based coatings quickly and efficiently, and it can also be used with more economical oil-based coatings.
Specification:
Model 126W
Maximum Working Width 1200 mm
Maximum Sheet Size 790 x 1200mm
Minimum Sheet Size 310 x 406mm
Sheet Thickness 100 ~ 600 gsm
BOPP Thickness 15~ 25μ
Total Power 73.3 kw
Laminating Speed 7 ~40 m/min
Machine dimensions(L xW xH) 8360x 2320 x 2900 mm
Net Weight 8620kgs
Subject to change without notice.
Standard equipments
1.Automatic stream feeder
*Reliable sucker feeds sheet smoothly at high speed.
*Sensitive mechanical and electronical double sheets detector and stop board for foreign objects.
The machine will stop immediately if any abnormality occurs.
*Precise and reliable front and side guide.
*With non-stop feeding additional table.
*Sensor detecting device is able to stop the machine or make alarm when there’s abnormity on feeding.
2. Laminating unit
*The laminating cylinder surface is precisely grinded and mirror-polished. Choose oil heating for autoconstant temperature control and equipped with temperature sensor to make the temperature stably.
*Two sets of oil pressure cylinder and manual oil pump to adjust the laminating pressure and keep thetwo rollers pressure balance.
*Film flatten roller can guarantee the film laminating flat.
*High precise film deviation adjust device to control the film running deviation.
*The whole machine compounding transmission system, inverter speed adjust, worm speed reducing,gear and chain and each roller can guarantee speed and convenient operation.
Gluing unit
* Gluing unit has two cylinders with independent motor drive, which can be run at high speed and can be controlled with main machine at same speed.
*High precise glue coating unit separately driven and speed can be adjusted to be suitable for different glues.
*When feeding abnormality occurs, the film will move back automatically.
*Film tension control device can adjust film tension.
*Film paralleling and tension adjust device.
*Two individual glue circulatory system is easily and quickly change glue for water base or solvent base.
*Extra film cutting and auto collection device.
4.Drying system

*The dryer can partly working or entirely working according to the actual need.The auto temperature control can use the heat per fectly.
*Hot air, quartz tube and heating element compounding system to make the heating effectively.
*Peculiar smell and air exhausting to decrease the influence over the health of the operators.
*The sealed drying cabinet has heat insulation layer to keep the normal temperature.

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.

Browse

- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB