Xiamen Fuyin Machinery Co., Ltd.
Home > Products > Printing Machinery/n.e.s. > Printer Slotter Die Cutter In-Line Folder Gluer

Printer Slotter Die Cutter In-Line Folder Gluer

— Flexo Printer Series, Printer Slotter, Die Cutter
Product Category: Printing Machinery/n.e.s.
Sales Method: Export, Manufacture
Min. Order Unit Price
Contact Info

Mrs.Sandy

Address: China (mainland) Fujian Xiamen,Flat D. 11/F Taiwanese Merchant Hall NO. 860 Xianyue Road Huli Xiamen China

Product Detail

Product Attribute:

  • China (mainland) More >
  • 03/24/2015
  • 03/25/2015

Product Content Description:

General Introduction
Automatic Flexo Printer Slotter and In-Line Folder Gluer is used to make complete corrugated cartons automatically after the corrugated paperboard is slotted to replace manual gluing and folding .The machine consists of a gluing unit, folding unit, automatic pressing and laminating unit and counter ejector unit. After corrugated paperboard is slotted , the gluing unit will supply glue to the corrugated paperboard flap, and the laminating unit folds the board and laminates it. The edge presing roller then presses the edges and the steel roller pre-presses it, then after folding ,the corrugated boards are reshaped by a shaping board (patting the fronts and back of the boards).Following this, the counter ejector sends out the pile of card-board and counts the quantity ,then binds the pile of cardboard.The gluing ,folding, pressing ,laminating and counter ejec-tor workflow can greatly improve working efficiency and increase the benefits of manufacturers through precise shaping after folding and precise operation of the counter and ejector unit.
The configurations of the machine
Lead Edge Feeder
* Fast setting of feeding speed, minimal maintenance, absolute safety and easy operation.
* Adjustable blower pressure can be used for different types of paper .
* Paper is delivered at the same speed to the lead edge puller to avoid wrinkling due to pressure.
* Adjustable air flowf for the blower which helps to feed paper into the machine.
* Fitted with brushes to remove dust from the surface of the paper.
* Double-side positioning of the paper sheets.
Vacuum Dust Remover
* High efficient vacuum dust removing device can vacuum and clean the dust quickly.Printing Unit
* Printing unit can be rotated a full 360°when paper is in motion or stopped,motorized control system.
* Printing assembly can be manually adjusted up to 12.5mm.
* Pneumatic down-pressure touch-board. The lines of high quality ceramic anilox roller can be from 200 to 350 lines.
This unit features a pneumatic down-pressure touch-board.
* The metering and the anilox rollers are automatically raised by the safety system when the air pressure stops.
* Enclosed chamber (doctor blade) system and rubber roller can be specified for ink supply system at customer`s option.
Vacuum transfer for printing unit.(bottom sucking)
* Conveying Device consists of one conveying box with groups of rolling wheels and strong air vacuum sucking transfer system. The paperboard are sucked on the wheels stably and transferred by them, which can transfer the small sized and thin paperboards more smoothly. The printing area on the paperboard can be avoided being scratched without pressing pull rolls. Dryer can be installed to dry ink immediately.
* Sucking and exhausting air device and tube.
* The pressure between rolling wheel conveying box and printing plate cylinder can be motorized adjusted.

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.

Browse

- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB