XLPE Armoured Power Cable Aluminum YJLV22 4*25Mm

Specifications
XLPE Armoured Power Cable Aluminum
We can make a variety of specification based on customers requests.
XLPE Armoured Power Cable
Conductor:
Solid or stranded copper
-Insulation
Cross-linked polyethylene or PVC( XLPE or PVC)
-Circuit Identication
The insulation shall be red, black
-Filler:
Polypropylene lament with lapped binding tape
-Inner Sheath:
Polyvinyl chloride (Black)
-Armor:
Galvanized steel wire
-Core-covering:
Binding tape
-Outer Sheath:
Polyvinyl chloride (Black)
-Application:
For use in ducts, trays and direct burial in ground. The cable is subject to immerse in water all the time.
Installation
This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.
Voltage grade is up to 35kv, cross-section area can be up to 400 sqmm (copper or aluminiun conductor). Conductor long-time operating temperature is 90 degrees. In short circuit, conductor highest temperature should be not more than 250 degrees.
Single core or multi-core
Copper or aluminium conductor
XLPE insulation
Copper tape or copper wire screen
Galvanized steel wire armored
PVC or PE sheath
Laying conditions: For lyaing under ground with large different altitude, be able to bear external machanical force and moderate pulling force
Quantity Per Month: 40000m
Delivery Way - Date Of Delivery: within 15 days