YSmart Technology Co., Ltd
Home > Products > Solar Controllers > 30A Solar Lighting Controller CM3024

30A Solar Lighting Controller CM3024

— Solar Controller, Solar Regulator, Solar Charge Controller
Product Category: Solar Controllers
Sales Method: Manufacture
Payment Term: T/T
Min. Order Unit Price
1 Piece
Contact Info

Mr.Robin

Address: China (mainland) Guangdong Shenzhen,No. 30 XinFeng Road, Potoubei Village, Ailian Town, Longgang Dist, Shenzhen
All Products (20)

Product Detail

Product Attribute:

  • China (mainland) More >
  • CM3024
  • Y-Solar
  • 09/05/2014
  • 09/05/2014

Product Content Description:

CM30 controller is a kind of intelligent, multi-purpose solar charge and discharge controller. The family use the fixed LCD display, with a very friendly interface; various control parameters can be flexibly set, fully meet your various application requirements. CM30 controller has following features:
Image of LCD graphic symbol
Simple button operation
Automatic Identification System Voltage level
Intelligent PWM charge mode
Automatic Temperature Compensation
Adjustable charge-discharge control parameters
Settable Operating mode of Load
Overload, Short Circuit Protection
Remote monitoring and control function (custom)
Battery reverse-discharge protection
Battery Low Voltage Disconnection (LVD)
Battery reverse connection protection
Accumulated function of charge and discharge Ampere hours
Installation
1. Ready tools and cables. Encourage you to matching the right cables. Ensure that the current density<4mm2 that is conductive to reducing the line voltage drop. Check weather the installation sitescompliance with the relevant safety requirements. Please avoid the damp, dusty, there is a place flammable, explosive and corrosive gases use the controller to install.
2. Install the controller into a fixed vertical plane. See section 5 of the pore size and pore spacing. In order to ensure a good thermal control conditions, please set aside each 10cm below the controller space.
3. As shown on the right, connect the (1) Load, (2) Battery and (3) Solar Panel to the controller according to the order of (1) (2) (3). Pay attention to the load, battery, solar panel and controller of same polarity.
4. Put into the external temperature sensor on the left of the controller (probe port). The temperature sensor should be similar space with battery. (Otherwise, the controller will control the parameters of all wrong temperature compensation. )
5. If you have remote monitoring and control function, please insert one end of the included communication wire on the right of the controller (communication port), the other end to connect to The host computer.
Demolition: To prevent accidents, please order the demolition of solar panels, battery and load disconnect with controller.
Note: Battery polarity will not damage the controller, but you will have a load equipment security risks.
Specifications:
Model: CM3024Z Rated Current: 30A Rated Voltage: 12V/24V Open Circuit Voltage of solar panel: <=50V Low Voltage Disconnection(LVD): 10.7V/21.4V Float Voltage: 13.8V/27.6V Low Voltage Reconnection(LVR): 12.5V/25.0V No load loss: <=30mA Loop Voltage Drop: <=170mV Charging Mode: PWM mode Temperature Compensation: -4mV/Cell/'C Installation cable area.: <=7#AWG (16mm2) Operating Temperature: -10'C--60'C Storage temperature: -30'C--70'C Humidity requirements: <=90%, no condensation Size: 90 mmx188 mmx48 mm Mounting hole spacing 60 mmx178 mm --dia5 weight 360g Notes Model suffix “Z” represent automatic identify system voltage level, "T” represent controller

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.

Browse

- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB