YSmart Technology Co., Ltd
Home > Products > Solar Controllers > 10A Solar Lighting Controller 10I ST

10A Solar Lighting Controller 10I ST

— Solar Controller, Solar Charge Controller, Solar Panel Controller
Product Category: Solar Controllers
Sales Method: Manufacture
Min. Order Unit Price
Contact Info


Address: China (mainland) Guangdong Shenzhen,No. 30 XinFeng Road, Potoubei Village, Ailian Town, Longgang Dist, Shenzhen
All Products (20)

Product Detail

Product Attribute:

  • China (mainland) More >
  • 10I ST
  • Y-solar
  • 08/13/2014
  • 08/14/2014

Additional Info.:

  • shenzhen
  • box

Product Content Description:

This 10I-ST 10A controller is Only For off-Grid PV Solar System.
3 Control modes to choose:

1.Charge Only

2.Light Control

3.Light and 15hours timer control(Settable)

For 10A 12V Pv System: 120W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage
For 10A 24V Pv System: 240W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage

Package including:
1.1PCS 10A Solar Contorller
2.1PCS User Manual

Overcharging protection
Can be used for all panels
Overdischarging protection
Short and Open Circuit protection
Full specification available if required
Fail Safe and cannot be damaged by accidental wiring mistakes
Advanced design with simple plug and play technology. No need for complicated adjustments
Full LED status indication: State of Charge(SOC) Red-Flat Battery: Amber-Low charge: Green- good charge: Green Flashing- Full Charge
◆Microcontroller digital accuracy
◆PWM charge mode & State of Charge(SOC)
◆Fully automatic operation & Electronic protections
◆Detects day and night using the PV array, timer setting
◆Double digital LED display, numbers equal to timer setting
◆Temperature compensation, with inside temperature sensor
◆Big terminals, big distance between terminals
10I: 12 Volt or 12/24 Volt auto work, 10 Amps (for PV and load)
Equalisation voltage: 14.8Volt
High voltage disconnect(HVD): 14.4Volt
Float voltage: 13.6Volt
Low voltage disconnect(LVD) 11.1Volt
Low voltage reconnect(LVR): 12.6Volt
Self-consumption: 6mA maximum
Temperature compensation: -30mV/℃/12V
Terminals: for wire sizes to 6mm2
Temperature: -35℃ to +55℃

LED indicator:
Solar Panel LED:
Green ON when solar is charging Battery.
Green blink when the syetem over voltage
Battery LED:
Green ON when battery level in the right range
Green Slowly flashing when battery level full
Yellow ON when battery level low
RED ON when loads cut off.
RED ON when the output is on
RED slowly flashing when it`s over load
(the load amps is 1.24 times of rated current for 60 seconds,or the load amps is 1.5 times of rated current for 5 seconds.)
RED blink when the load is short -circuit.
This controller has Light and Timer control Function
Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.
Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after 0-15 hours.
Lighting control Option
1.Press the power switch for 5 seconds and select the desired LIGHTING CONTROL option.The LED is on,which confirmed you have selected the right one.
2.The controller requires 10 munites of countinuous transiton values before it starts to work.These constraints avoid false transitions due to lighting or dark storm clouds.
3.10 minutes off before the controller start to work
4.A brief description follows belows:
Number 0: Dusk-to-Dawn,light is on all night
Number 1: Light is turn
Quantity Per Month: 4000

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.


- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB