Lycek Inc. Limited
Home > Products > Rechargeable Batteries > 1.2V 1450MAh NiMH USB Rechargeable AA Battery-Green

1.2V 1450MAh NiMH USB Rechargeable AA Battery-Green

— USB Rechargeable AA Batteries, USB Rechargeable Battery, USB Battery
Product Category: Rechargeable Batteries
Sales Method: Export, Manufacture
Payment Term: T/T, L/C
Min. Order Unit Price

Product Detail

Product Attribute:

  • China (mainland) More >
  • LY-URB-004
  • CE, RoHS
  • 08/31/2012
  • 08/31/2012

Additional Info.:

  • by Sea Shenzhen
  • blister card

Product Content Description:

Input: DC 5V Output: 1.2V---200±20mA Capacity: 1450Mah
1. Plug in the USB rechargeable battery to any USB interface for charging. LED indicator light ( blue ) turns on when charging, light off after fully charged.
2. Make use of advanced design of protection circuit to avoid short circuit.
3. Make use of constant current charging, with independent detection of battery power status and micro CPU control, ensure full charging according to the different battery power status.
4. With built-in automated trickle charging after fully charged, battery can be more fully charged and extend the battery life cycle.
5. for the sake of the best charging effect, please refer to the following charging time-table after fully charged (light off).
Precautions to Ensure the safety on banding battery
1. Batteries should be charged prior to use.
2. When using a new battery for the first time or after long term storage, please fully charge the battery beforeuse.
3. for charging methods please referrence to our technical handbook.
4. Use the correct charger for Ni-Cd or Ni-MH batteries.
5. Do not reverse charge batteries.
6. Do not short circuit batteries, permanent damage to batteries may result.
7. Do not incinerate or mutilate batteries, may burst or release toxic material.
8. Do not solder directly to cells or batteries.
9. Do not subject batteries to adverse condition such as extreme temperature, deep cycling and excessive overcharge/overdischarge.
10. Store batteries in a cool dry place.
11. Do not mix batteries with other battery brands or batteries of a different chemistry such as alkaline and zinc carbon.
12. Do not mix new batteries in use with semi-used batteries, overdischarge may occur.
13. Avoid batteries being used in an airtight compartment. Ventilation should be provided inside the battery compartment; otherwise batteries may generate hydrogen gas, which could cause an explosion if exposed to an ignition source.
14. When connecting a battery pack to a charger, ensure correct polarity.
15. If find any noise, excessive temperature or leakage from a battery, please stop its use.
16. When the battery is hot, please do not touch it and handle it, until it has cooled down.
17. Do not remove the outer sleeve from a battery pack nor cut into its housing.
18. When find battery power down during use, please switch off the device to avoid overdischarge.
19. When not using a battery, disconnect it from the device.
20. Unplug a battery by holding the connector itself and not by pulling at its cord.
21. After use, if the battery is hot, before recharging it, allow it to cool in a well-ventilated place out of direct sunlight.
22. Never put a battery into water or seawater.
Quantity Per Month: 200000

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.


- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB