Shanghai Sanei Elevator Co., Ltd.
Home > Products > Elevators & Escalators > Passenger Elevator

Passenger Elevator

Product Category: Elevators & Escalators
Sales Method: Manufacture
Payment Term: T/T
Min. Order Unit Price
Contact Info

Mr.sanrong

Address: China (mainland) Jiangsu Nanjing,Yueluo Road No.2120

Product Detail

Product Attribute:

  • China (mainland) More >
  • SN-982
  • 08/13/2012
  • 08/14/2012

Product Content Description:

1. Automatic operation: Automatically open the door; automatic time-lapse closing; manual closing in advance.
2. Closing protection: If anyone enters into the elevator while the door is closing, it will stop closing to open again.
3. Full-load directional operation: when the elevator reaches the largest load, it will only respond to the instructions inside.
4. Energy-saving function(passenger elevator): If no one uses the elevator during the setting time, the illumination and air blower in the car will turn off automatically and turn on with the instructions.
5. Automatic base station return: With no calling, the elevator will return to the appointed base station.
6. Automatic floor return when energized: The elevator will return to the floor when energized.
7. Anti-disturbance: When the elevator load is below the setting and the instruction inside the car is more than three, then all the instructions will be cancelled.
8. VIP service: During VIP service, the elevator will abide by the instruction inside the car in advance to ensure the rapid arriving of the passengers.
9. Forced closing: When the opening time is beyond the setting, the system will ignore the closing protection function temporarily and close forcedly.
10. Breakdown testing: When the elevator breaks down, the system will analyze the reason automatically for the maintenance staff.
11. Repeated closing: When the door is not closed in the setting time with the closing instruction, the door will open and close again.
12. Standing function: When the elevator is not in use, standing floor can be chosen.
13. Automatic turning on and off function: The turning on and off can be set without any inspection.
14. Operation cancel: When the passenger chooses the wrong floor, he can cancel it and choose again.
15. Non-stopping floor setting: The passenger can set the non-stopping floor according to his need.
16. Calling button diagnosing function: The system will ignore the floor-choosing instruction when the calling button of this floor is closed for a long time.
17. Hibernate function: When the elevator is not in use in the setting time, the monitor will hibernate to increase the lifespan.
18. Intelligent operation: When the elevator is in use, the elevator will choose the best operation mode according to the passenger number and time.

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.

Browse

- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB