Mipcoole Glass Co., ltd
Home > Products > Tempered Glass > Cheap price 6mm 8mm 10mm China factory tempered glass

Cheap price 6mm 8mm 10mm China factory tempered glass

— tempered glass, 10mm tempered glass
Product Category: Tempered Glass
Sales Method: Export, Manufacture
Payment Term: T/T, L/C, D/D, Check
Trade Term (Incoterms): EXW, FOB, CFR, CIF
Min. Order Unit Price
200 Square Meters
Contact Info

Mr.kevin yang

Address: China (mainland) Guangdong Shenzhen,K5,10F,Guanghao Internatioal Center Building,Longhua

Product Detail

Product Attribute:

  • China (mainland) More >
  • MP-003
  • mipcoole
  • 09/01/2017
  • 09/05/2017

Product Content Description:

Cheap price 6mm 8mm 10mm China factory tempered glass
Tempered transparent glass is fabricated by heating annealed glass to over 600°C and cooling it rapidly,

which locks the outer surfaces of the glass in a state of high compression, and the core or center

of the glass in compensating tension. 
 

Specification:

Available Thickness: 4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm

 

Size: Max 3000*8000mm,Min150*300mm,Customized size is accepted.

 

Color: Clear, Other color you can get from us such as ultra clear, blue, grey, green, bronze etc

 

Glass type: clear float glass, tinted float glass, reflective glass, Acid Etched float glass, silk screen glass etc

 

Deep processing: Edge work, Holes, Shapes and other processing like acid etched, color painted,digital printing, pattern silkscreen, insulated, laminated. All work done on tempered glass (beveling, cutting, drilling, etc.) must bedone before tempering.

 

Holes and notches

Dimension of holes: The minimum dimension of a hole should not be less than the thickness of the glass. The maximum dimension of the hole should not be more than 1/3 the narrowest dimension of the piece.

Notches and cutouts:All must have a fillet with radius equal to, or greater than the thickness of the glass.

Glass edge to nearest point of hole: Glass less than 1/2" thick should not have holes located any closer than 1.5 times the thickness of the glass.  Glass thicker than 1/2" should not have holes located any closer than 2 times the thickness of the glass.

 

Glass corner to nearest point of hole: Holes should not be located any closer than 6.5 times the thickness of the glass.
 

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.

Browse

- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB

Related Category Searches on ttnet.net: