Hongshu Water-Based Printing And Coating Material
Home > Products > Paper Coatings > Water-Based Varnish

Water-Based Varnish

— water based varnish, papaer coating, high gloss
Product Category: Paper Coatings
Sales Method: Manufacture
Payment Term: T/T, L/C
Min. Order Unit Price
Contact Info


Address: China (mainland) Guangdong Foshan,No.10 Zhaofeng Road Shishan Ind . District A Zone Nanhai Foshan Guangdong Province China

Product Detail

Product Attribute:

  • China (mainland) More >
  • H-5103
  • HS
  • 03/22/2012
  • 03/23/2012

Additional Info.:

  • 25KG/50KG/120KG plastic containers

Product Content Description:

Name: water-based varnish (high gloss)

Model: H-5103

Use: high gloss , commonly used , for paper package .

Description: H-5103 is an environmentally friendly water-based varnish on the general-purpose high-light, has good gloss, gloss retention, fast drying, good printability. A variety of ink has good wetting leveling, strong anti-alcohol , printing machine is easy to clean. It is meet the national and EU environmental standards, through the EU ROHS test, compliance with international environmental requirements. . Suitable for food packaging, footwear, electronics, pharmaceutical, tobacco and other high-end packaging.

Appearance: milky white liquid,
Solid content :40%,
Viscosity (Viscosity Cups 3 , 25℃ seconds): 18 ~ 20,
Gloss: 60 ± 5

1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 ℃.
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH ≤ 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.

25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.
Quantity Per Month: 12
Delivery Way - Date Of Delivery: 5 DAY

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.


- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB

Related Category Searches on ttnet.net:

Related Keyword Seraches on ttnet.net: