Hongshu Water-Based Printing And Coating Material
Home > Products > Paper Coatings > Water-Based Polish OPV

Water-Based Polish OPV

— varnish, water based varnish, papaer coating
Product Category: Paper Coatings
Sales Method: Manufacture
Payment Term: T/T, L/C
Min. Order Unit Price
1 ton
Contact Info

Mr.Lei

Address: China (mainland) Guangdong Foshan,No.10 Zhaofeng Road Shishan Ind . District A Zone Nanhai Foshan Guangdong Province China

Product Detail

Product Attribute:

  • China (mainland) More >
  • H-6008
  • HS
  • 03/22/2012
  • 03/23/2012

Additional Info.:

  • shiping
  • 25KG/50KG/120KG plastic containers

Product Content Description:

Name: Water-based polish OPV

Model: H-6008

Description: H-6008 is a water-based eco-friendly high gloss varnish (commonly known as polished overprint varnish). With high wear resistance, excellent gloss, good gloss and color retention, fast-drying, the ink on a wide variety of affinity. Can afford to use version, version off smoothly, giving the print quality of the mirror effect. It can used for electronic and electrical appliances, pharmaceuticals, packaging and other high-grade alcohol and tobacco packaging.

Appearance: milky white liquid,
Solids 28%,
Viscosity (seconds): 10 ~ 12, (Viscosity Cups 3 , 25℃),,
Gloss: 80 ± 5

Notes:
1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7 / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 ℃.
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6, It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH ≤ 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.

Package:
25KG/50KG/120KG plastic containers
Quantity Per Month: 12
Delivery Way - Date Of Delivery: 5 day

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.

Browse

- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB

Related Category Searches on ttnet.net:

Related Keyword Seraches on ttnet.net: