Guangzhou Langs Chemical Additives Co.,Ltd
Home > Products > Textile Chemicals > Heat Sublimation Transfer Printed Coating for Cotton

Heat Sublimation Transfer Printed Coating for Cotton

— Heat Sublimation, Transfer Printed Coating for Cotton, Textile Chemical
Product Category: Textile Chemicals
Sales Method: Export, Manufacture
Payment Term: T/T
Min. Order Unit Price
1000 Pieces USD 3.58 / Piece
1000 Pieces USD 3.58 / Piece
Contact Info


Address: China (mainland) Guangdong Guangzhou,Room 2D01 32 Helong 1st Road Baiyun District Guangzhou China
All Products (19)

Product Detail

Product Attribute:

  • China (mainland) More >
  • LA-38P
  • BV SGS Oeko-tex Standard 100
  • 06/29/2017
  • 06/29/2017

Product Content Description:

Heat Sublimation Transfer Printed Coating for Cotton LA-38P


This cotton fiber coating can be used for Heat Sublimation Transfer Printed process, the color is real, and the hand feeling is soft. 

Won't occur color change, fade, infiltration phenomenon for a long term.


At present, a more mature industrial production methods of transfer printing is the gas phase transfer printing process, mainly used 

for printing of synthetic fibers.

The advantages of this process are easy to change pattern design, the expressive of floral pattern is fine and strong, colorful diversity, high degree of uniformity, low defect rate. No need to post washing, no waste water and pollution, it's environmentally friendly.


The weakness of transfer printing is this process couldn't do well in the natural fibre,main reasons are the rate of color yield and color fastness unable to meet the requirements. 


For transfer printing of cotton fabric, generally make fiber degeneration in pretreatment process, so that the cotton fibre become has an affinity to volatile dye.After our developed of coating pulp for transfer printing 

on natural fibre, not only ensure cotton transfer printing process can successfully completed, but also make the rate of color yield, wet and dry rub fastness and color fastness can reach to standard after use of our product, it's fully recognized and acceptance by the applied unit.




1.This product is non-toxic and green, no waste generated during the using process.


2. Convenience and easy to use, just need to process the half bleached cloth by pre-treatment of transfer and 

drying with this product. After drying, then consistent with the traditional transfer printing no need to post-washing.


3. High quality and stability. Our coating pulp is the water-based, not contain formaldehyde.




According to requirements of customer our product can be divided in to two kinds, that's spray type and printing paste. 


1.Using method for printing paste(only use our product dilute it with water at ratio of 1:1)

In order to achieve uniform coating, in the process of transfer printing for cotton, it must use surface printing (use 80-120 mesh screen printing), then drying cloth, flat the transfer paper on the surface of clothes, transfer printing and pressing at 180 - 200 centigrade degrees (about 30 seconds).

2.Using method for spray type(only use our product dilute it with water at ratio of 1:1)

Spray our product evenly on the cloth surface till the surface is completely with liquid, then dry the clothes , 

flat the transfer paper on the surface of clothes, transfer printing and pressing at 180 - 200 centigrade degrees (about 30 seconds).


Company Information


Established in 2009, Guangzhou Langs Chemical Additives Company Limited is a professional high tech enterprise based in Guangzhou. We are fully committed to producing technologically advanced Textile Auxiliaries and Daily Chemical Additives.  We pursue the management tenet of "Quality is superior, Service is supreme, Reputation is first" 






Send your inquiry to this supplier

- Your message must be between 20-3000 characters.


- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB