Home > Trade Leads > Electrical Components & Equipments > Sensors & Transducers > Humidity Sensors > Sell > VPA. 8000.1003 Dew Point Sensor For Extreme Dry Air

VPA. 8000.1003 Dew Point Sensor For Extreme Dry Air

Post Date:

2018/12/19 15:55:57

Expired Date:

2019/03/19 23:59:59

Trade Leads Category:

Humidity Sensors

Company Info

Shenzhen Week Technology Ltd.
Contact Person: Yan Zhang
Address: 16 Floor, Building #3, Zhongke Mansion, Gaoxin South 1St Rd, Hi-Tech Park, Nanshan
City: SHENZHEN
State/Province: GUANGDONG
Country/Region: China (mainland)
Zip/Post Code: 518067


Details

VPA.8000.1003 Dew Point Sensor Product Description
VPInstruments' dew point transmitters are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. The calibrated transmitters can be instantly incorporated into VPVision or they can be connected to your air or gas management and control system.

Maintaining the dew point of your air or gas system will prolong the life of your equipment. Permanent monitoring enables you to detect and prevent problems in time.

VPA.8000.1003 Dew Point Sensor Features and benefits
2-wire loop powered connection
Dew point or ppm moisture content
IP66 (NEMA 4X)
Excellent sensor protection
Fast response time

VPA.8000.1003 Dew Point Sensor Application
Extreme dry air

VPA.8000.1003 Dew Point Sensor Specifications

Performance
Measurement range -100 ... +20°C | -148 ... 68 °F dew point
Accuracy (dew point) ±2°C | ±3.6 °F dew point
Response time 5 mins to T95 (dry to wet)
Electrical output/input
Output signa 4 ... 20 mA (2-wire) current source,
configurable over the entire range
Supply voltage 12-28VDC
Current consumption 20mA max
Supply voltage influence ±0.005% RH/V
operating conditions
Operating humidity 0 ... 100% RH
Operating temperature -40 ... +60°C | -40 ... 140 °F
Operating pressure 450 barg max.
Temperature coefficient Temperature compensated across
operating temperature range
Mechanical specifications
Ingress protection IP65 | NEMA 4
Housing material Stainless steel
Dimensions L=132mm x ø27mm | 5,2 x 1,1"
Filter HDPE Guard <10 μm
Process connection 5/8" - 18 UNF
Connection DIN connector

Related Searches on ttnet.net: