Home > Trade Leads > Electrical Components & Equipments > Sensors & Transducers > Ultrasonic Sensors > Sell > TSPC-30S1 Series ToughSonic 14 Ultrasonic Level & Distance Sensor

TSPC-30S1 Series ToughSonic 14 Ultrasonic Level & Distance Sensor

Post Date:

2018/11/13 17:27:58

Expired Date:

2019/02/11 23:59:59

Trade Leads Category:

Ultrasonic Sensors

Company Info

Shenzhen Week Technology Ltd.
Contact Person: Yan Zhang
Address: 16 Floor, Building #3, Zhongke Mansion, Gaoxin South 1St Rd, Hi-Tech Park, Nanshan
State/Province: GUANGDONG
Country/Region: China (mainland)
Zip/Post Code: 518067


ToughSonic 14 Level & Distance Sensor
PC or Button Setup, Waterproof, Two Selectable Outputs 


TSPC sensors and SenixVIEW software put the power of ultrasonics in your hands yet retain the simplicity of push-button TEACH setup. You can quickly adjust, optimize, save and clone your applications without calibration! 

ToughSonic sensors contain a rugged transducer potted in a stainless steel housing for long life.

Outputs respond to measured distance and non-contact technology means nothing touches your materials.

Many applications exist in all industries. 

Non-Contact Ultrasonic Distance & Level Measurement

TSPC-30S1 Series Ultrasonic Level & Distance Sensor Features 
Distance Measurements
• Long range, short dead band
• Unaffected by optical factors like color and transparency
• PC or button “teachable” setup
• Narrow beam with adjustments to optimize performance
 Temperature compensated
Packaging & Performance
• Quick mounting
• Durable sealed housing for wet or dirty applications
• Short & overload protected I/O
• Multi-sensor synchronization
• Adjustable sensitivity
• Rear status indicators (3)
Free Functionality using adjustable interface features like switch hysteresis and time delays to build complete solutions such as pump or material flow controllers. Save cost by eliminating PLCs, delay circuits and time delay relays!

TSPC-30S1 Series Ultrasonic Level & Distance Sensor Specifications

Optimum Range

 10 ft. (3 m)

Max Range

 14 feet (4.3 m)


 Typ. < 4 in. (100 mm)


 Button "teach" or SenixVIEW

Case Material

 316 stainless steel


 Stored in non-volatile memory


 -40 to 158 ℉ (-40 to 70℃)


 Two selectable, plus serial data


 0 to 100% operating


 Ruggedized piezoelectric


 Temperature compensated




 Digital:0.0034 in. (0.086 mm); Analog:4099 steps (0-10 VDC), 3279 steps (4-20 mA)


 Nominal 0.2% of range @ constant temp. Affected by target, distance, environment

Update Rate

 20 Hz (50 ms), SenixVIEW adjustable; also affected by SenixVIEW filter selections

Output Selection

 Voltage & 4-20 mA current loop (defaults), switches, or a combination; see C ONNECTIONS below

Voltage Output

 0-10, 0-5 VDC or PC customized, 10 mA max; also push-button teachable endpoints

Current Loop

 4-20 mA or PC customized, current sourcing, max. loop 450Ω, teachable endpoints

Sinking Switch

 150 mA max. @ 40 VDC max., teachable set point & polarity, fault indication

Sourcing Switch

 150 mA max. @ input voltage, teachable set point & polarity, fault indication

RS-232, RS-485

 Modbus protocol, 9600 to 115200 baud, 8 data bits, 1 stop, no parity

SYNC feature

 Permits up to 32 sensors to operate in close proximity without interaction

Target Requirements


 Detects flat or curved objects. Surface must reflect ultrasound to sensor

Max. Distance

 Affected by size, shape, orientation of target (sound level reflected back to sensor), environment

 Restrict use to Optimum Range when using over a wide range of environmental conditions


 Flat surfaces should be oriented perpendicular to sensor output beam


 Unaffected by target color, light, transparency or other optical characteristics

TSPC-30S1 Series Ultrasonic Level & Distance Sensor Connections

Cable Connection





 10-30 VDC @ 60 mA maximum; Typical:45 mA @ 24 VDC (**)



 Power and interface common

Voltage Output

 White *

 0-10 VDC, 0-5 VDC or custom end values between 0 and 10 VDC

Current Loop Output

 Black *

 4-20 mA or user adjusted end values between 4 and 20 mA

Switch #1 Output

 Black *

 Sinking ("NPN") or Sourcing ("PNP"), user selected

Switch #2 Output

 White *

 Sinking ("NPN") or Sourcing ("PNP"), user selected

RS-232 out / RS-485-


 Serial data connection (depends on model - see part numbers)

RS-232 in / RS-485+


 Serial data connection (depends on model - see part numbers)

(*) Outputs on the black and white wires are SenixVIEW selected. The black wire options are 4-20 mA current loop or switch. White wire options are 0-10 VDC or switch. Switches can be sourcing or sinking. Max current loop resistance is derated below 15 VDC input voltage.
(**) At default update rate. Output currents not included. Sensitivity reduced below 15 VDC input voltage.

TSPC-30S1 Series Ultrasonic Level & Distance Sensor Part Numbers


 Number Description


 Serial RS-232 interface (PC COM port compatible)


 Serial RS-485 interface (allows addressable multi-sensor networks)