Home > Trade Leads > Tools, Measurement & Analysis Instruments > Pressure Measuring Instruments > Pressure Sensors > Sell > MDP200 Series MEMS Differential Pressure Sensors

MDP200 Series MEMS Differential Pressure Sensors

Post Date:

2019/01/14 17:33:00

Expired Date:

2019/04/14 23:59:59

Trade Leads Category:

Pressure Sensors

Company Info

Shenzhen Week Technology Ltd.
Contact Person: Yan Zhang
Address: 16 Floor, Building #3, Zhongke Mansion, Gaoxin South 1St Rd, Hi-Tech Park, Nanshan
City: SHENZHEN
State/Province: GUANGDONG
Country/Region: China (mainland)
Zip/Post Code: 518067


Details

MDP200 Series MEMS Differential Pressure Sensors General Description
MEMSIC's MDP200 series MEMS differential pressure sensors measure ultra-low gas pressures covering the range of up to ±500Pa (±2 inH2O). The technology is based on MEMSIC's highly successful proprietary CMOS thermal accelerometers already sold in millions. MEMSIC's thermal flow sensing element is monolithically integrated with CMOS signal processing circuitry and embedded software capable of converting gas flow rates to a digital format. The signal is linearized and temperature compensated. 

MDP200 series offers a wide dynamic range, superb long-term stability, and outstanding repeatability and hysteresis. The MDP200 is also available as a low cost flow detector with an analog output and it can easily be configured to suit a variety of applications from burner control, HVAC, medical flow to industrial processing control. 

MDP200 Series MEMS Differential Pressure Sensors Features
• Pressure range up to ±500Pa with high accuracy of ±3.0% m.v.
• Pressure based on thermal micro-flow measurement
• Outstanding hysteresis and repeatability
• Linearized and temperature compensated
• Digital I2C with 16bit resolution
• Cost Effective
• RoHS and REACH compliant
• Digital I2C Output
• Detects pressure difference as low as 0.02 Pascal

MDP200 Series MEMS Differential Pressure Sensors Applications
• Medical CPAP and Ventilator
• HAVC and building control solution
• Burner Control
• Filter Monitoring
• Process Control and Automation

MDP200 Series MEMS Differential Pressure Sensors Performance 

Parameter -500 Pa Unit
Measurement Range ±500 Pa
Zero-point Accuracy Below Resolution (0.016 Pa) Pa
Span Accuracy ± 3.0 % m.v
Total Error (0ºC - 50ºC) ±3.5 % m.v
Zero-point Repeatability and Hysteresis ±0.05 Pa
Resolution (Near Zero)/
Lowest Detectible Pressure
0.016 Pa
Response Time/
Communication Update Rate
8 ms
Span Repeatability and
Hysteresis
0.5 % m.v.
Over Pressure 1.5 Bar
Span Shift due to
Temperature Variation
0.05 %m.v. per ºC
Offset Shift due to
Temperature Variation
<0.03 Pa
Offset Stability Pa/year
Non-Linearity(BFSL)
0.3% (0-100 Pa)
0.4% (0-200 Pa)
0.8%(0-500 Pa)
% Full Scale
Orientation Sensitivity
< resolution - port @ 90º vs 270º
<0.05 Pa - port @ 180º vs 90º
Pa
Gas Flow Through Sensor 100 ml/min

MDP200 Series MEMS Differential Pressure Sensors Environment
Parameter -500 Pa Unit
Operating Temperature -20 to +80 ºC
Storage Temperature -40 to +85 ºC
Relative Humidity (Non-
Condensing)
To 95 %
Radiated Susceptibility 5 V/m
ESD 4/(8) kV
Shock 50G @ 5ms GPeak
Vibration (5-2000 Hz) 20 Grms
Media Compatibility N2, O2, Air  
Orientation Sensitivity TBD Pa
Protection IEC IP30  
Barb Strength 4 lbf (3 orthogonal directions)

MDP200 Series MEMS Differential Pressure Sensors Electrical
Parameter -500 Pa Unit
Input Voltage Range 3.0-3.6 Vdc
Supply Current 7 mA
Interface I2C  
Resolution 16 (bi-direction) Bit
Bus Clock Frequency < 400 KHz
I2C Default Address 0x31  

MDP200 Series MEMS Differential Pressure Sensors Mechanical Specifications


MDP200 Series MEMS Differential Pressure Sensors Ordering Information

Options Ranges Calibration Housing
MDP200 -500   500Pa B   Bi-Directional Y   Barb
U   Uni-Directional T   Manifold
Example: MDP200-500BY = MDP200 differential pressure sensor, 500 Pascal, Bi-Directional, Barb Fitting

Related Searches on ttnet.net: