Home > Trade Leads > Electrical Components & Equipments > Sensors & Transducers > Sensors/n.e.s. > Sell > OPTOD Optical Dissolved Oxygen & Temperature Sensor

OPTOD Optical Dissolved Oxygen & Temperature Sensor

Post Date:

2018/11/01 15:43:48

Expired Date:

2019/01/30 23:59:59

Trade Leads Category:

Sensors/n.e.s.

Company Info

Shenzhen Week Technology Ltd.
Contact Person: Yan Zhang
Address: 16 Floor, Building #3, Zhongke Mansion, Gaoxin South 1St Rd, Hi-Tech Park, Nanshan
City: SHENZHEN
State/Province: GUANGDONG
Country/Region: China (mainland)
Zip/Post Code: 518067


Details

OPTOD Optical Dissolved Oxygen & Temperature Sensor Optical technology:
The OPTOD sensor is based on luminescent optical technology and is approved by the ASTM International Standard Method D888-05.

Without calibration requirements, and thanks to an ultra low power technology, the OPTOD sensor is suitable for field work as well as long and short term monitoring.

With no oxygen consumption, this technology gives an accurate measure in all situations, even in very low oxygen concentrations.

Digital Technology:
The "smart" OPTOD sensor stores calibration and history data within the sensor. This allows you a "plug and play" system without re-calibration.

Digitally optimised measurement technology
• Optical luminescence technology requires minimal maintenance
• Digital sensor: Modbus RS-485
• No calibration required and therefore little to no drift occurs
• Robust and Watertight

OPTOD Optical Dissolved Oxygen & Temperature Sensor Applications
• Industrial effluent treatment
• Urban waste water treatment
• Surface water monitoring
• Drinking water

OPTOD Optical Dissolved Oxygen & Temperature Sensor Specifications

Measurement
Measurement principle Optical measure by luminescence
Measurement ranges 0.00 to 20.00 mg/L
Resolution 0,01
Accuracy +/- 0.1mg/L, +/- 0.1 ppm, +/- 1 %
Response time 90% of the value in less than 60 seconds
Flow No flow necessary
Temperature compensation Via CTN
Operating temperature -10°C to +60°C
Signal interface Modbus RS-485 (standard) and SDI-12 (option)
Maximum refreshing time < 1 second
Sensor power-supply 5 to 12 volts
Consumption Standby 25 μA, Average RS485 (1 measure/ second) : 4.4 mAAverage SDI12 (1
Sensor
Dimensions Diameter: 25 mm ; length: 146 mm
Weight Weight 450g (sensor + cable 3 metres)
Material Stainless steel 316L
Maximum pressure 5 bars
Connection 9 armoured connectors, polyurethane jacket, barewires or waterproof Fisher
Degree of protection IB68 up to gland

Related Searches on ttnet.net: