1)Independent mode: it works as wireless auto smoke and
fire detector alarm.
2)Compatible mode: it works with our burglar alarm system.
3) widely used for kitchen and no smoking place.
4)self-detector and automatically give an alarm warning to
users. When it works with our burglar alarm, with LED
indicated, it sends a wireless signal to alarm host if
detecting smoke hydronium. and then it alarms and the alarm
host auto-dials the pre-setting telephone or mobile phone
5) Alarm condition required: the smoke density with time
reaches the limit. or the "test" button on the detector is
Power : 9V ,12V DC current : quiescent current of less than
10 mA current police work in between 20 ~ 50mA smoke
sensitivity : comply with UL Standard 217
Temperature :- 40 ° C -45 ° C relative temperature : 10%
-90% volume : 85 Db (in 10 feet)
Choice suitable place to installing and using two screws to
fix the back of the plank on the wall. The detector is a
sealed device, and does not allow open, Please put the
battery into the battery box or corrected connect all of
connecting wire. The detectors will be installed on the two
columns on the back of the plank, and a clockwise rotation,
convinced that the installation of the two columns have
been installed down-detector back.
Well and High Quality Control ,
New Product ,
Competitive Prices ,