Xinxunwei Technology Co., Ltd.
Home > Products > Welding & Soldering Supplies/n.e.s. > GOOT CP-3015 Attaching-Solder Wire

GOOT CP-3015 Attaching-Solder Wire

— BGA Attaching-Solder Wire, Minitype Reflow Oven, Sealing-Off Station
Product Category: Welding & Soldering Supplies/n.e.s.
Sales Method: Export, Manufacture, Wholesale, Retail
Payment Term: T/T, L/C, Western Union
Min. Order Unit Price
10 Pieces USD 1.63 / Piece
Contact Info


Address: China (mainland) Guangdong Shenzhen,Floor 3, Xinfuwei Industrial Zone, Xintang Industrial Park, Baoan District

Product Detail

Product Attribute:

  • China (mainland) More >
  • CP-3015
  • GOOT
  • 03/04/2014
  • 03/04/2014

Additional Info.:

  • shenzhen
  • Width: 3mm, Length: 1.5m

Product Content Description:

GOOT CP-3015 attaching-tin wire The necessary of BGA maintaining.
Width: 3mm, Length: 1.5m attaching-tin wire, nowadays it's senior copier!
Currently, it's very hard to buy the original GOOT attaching-solder wire on market. The ones named high orginal qulity goods are generally this kind of senior copier.
This attaching-tin wire is senior copier produced by one manufactory in mainland. The effect is excellent and it's suggested to use mostly.
Attaching-tin wire is a tool to clean pad, actually it's a string knited by copper wire. Someone use attaching-tin wire to clean components' pad pin like IO or BGA pad components, to make soldering pad's surface smoothly. Actually, this using way is not right, under this condition, using attaching-solder wire may cause pad damaged.
Attaching-tin wire should be used under pin is connecting tin when welding components, it can attach out the tin on pins to keep non-short circuit between pins. Besides, it can be used to clean BGA components' pad when reballing BGA components, to make the success rate of reballing increasing.
GOOT attaching-solder wire is made by fine copper and special chemical formulation. It can keep fast, good and saving. It's used to attach the rest tin when getting rid of tin. It's able to bear oxidation and anti-corrosion, the function fo heat conduction and attaching tin is excellent, attaching tin completely. In sealing-off, after taking off chip, there is still plenty of tin on board, it will affect chip's welding. It usually adopts attaching-tin wire to attach clean, just put soldering iron on attaching-tin wire, then put them on chip pad, and move slowly, when the tin on pad melts, it will be attached by the wire, and can attach all the melting tin between pins.
After attaching, we'd better wash the pad position clearly by wash-board water. Attaching-tin wire can be used on bigger components.
Quantity Per Month: 100 Volume
Delivery Way - Date Of Delivery: 1 week

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.


- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB