Stainless Steel Square Wire Mesh

Stainless steel square wire mesh also be called stainless steel square wire cloth.

The materials usually used are:SS304,SS304L.SS304H,SS316,SS316L,SS321,SS310S,SS430.

The specifications of stainless steel wire mesh is identified by mesh count or opening

size./wire diameter

Mesh count is meshes per inch. S.s mesh count is decided by meshes in warp direction and weft direction.
Square mesh has the same mesh count in both warp and weft direction. The more mesh counts are, the smaller the opening size is. and vice versa.
You can use the following calculator to convert between mesh count, opening size and wire diameter.

S.S.Plain weave wire mesh(the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.), It is the simplest tissue of wire cloth. Plain weave stainless steel mesh has the same front and back structure, many surface crossings, more wire curves. It’s firm and flexible.

S.S.Twill weave wire mesh(made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires). The surface of twill weave mesh has less crossings than the plain weave mesh. And there is twill textures on the surface. With the same wire dia.and opening size, the twill weave mesh is less firm than the plain weave mesh. But twill weave can have more mesh counts than the plain weave mesh, so twill weave is often used for woven mesh with large wire-dia.,more mesh counts which is difficult to be woven in plain weave pattern.
Delivery Way - Date Of Delivery: In 15 days after recept the payment