Changzhou Wantai Electrical Appliance Co., Ltd
Home > Products > Stepping Motors > CNC Router Kits 4 Axis Nema 34 Stepper Motor 1600Oz CNC Router Or Milling Machines

CNC Router Kits 4 Axis Nema 34 Stepper Motor 1600Oz CNC Router Or Milling Machines

— Stepper Motor, Stepping Motor, Stepper Motor Driver
Product Category: Stepping Motors
Sales Method: Export, Manufacture, Wholesale, Retail
Payment Term: T/T, L/C, D/P sight
Min. Order Unit Price
1 Piece
Contact Info

Mrs.Linda Feng

Address: China (mainland) Jiangsu Changzhou,1803, Building a, Jiaxin Garden, New Area, Changzhou City, Jiangsu Province, China

Product Detail

Product Attribute:

  • China (mainland) More >
  • N20106864358
  • Wantai
  • 05/19/2014
  • 05/20/2014

Additional Info.:

  • carton

Product Content Description:

This kit includes:
4 PCS Nema 34 Stepper Motor with 1600oz-in holding
torque 85BYGH450C-012,
4 PCS Stepper Driver with 8.2A DQ860MA replacing MD882,
2 PCS Power Supplies for 350W, 48VDC,
1 PC Breakout Board,
1 PC Cable.
1, Stepper Motor
Technical Specifications
Part No.: 85BYGH450C-012
Frame Size: NEMA34
Step Angle: 1.8 degree
Voltage: 5.7V
Current: 3.0A/phase
Resistance: 1.9 Ohm/phase
Inductance: 22 mH/phase
Holding torque: 11.3N. m 1600oz-in
Rotor inertia: 3600g-cm2
Number of wire leads: 4
Weight: 5 kg
Length: 151mm
Note: Nema 34 Stepper Motor with 1600oz-in holding torque on single shaft, front shaft length
is 37mm with 25mm flats length, the diameter for motor shaft is 14mm.
Please tell us if you need Double shaft or single shaft, we can manufacture both for you. If you
need Double shaft, please tell us your requirements for length of front and rear shaft, as well as
the diameter. So that we can offer you the quite good products, thanks!
2, Stepper Motor Driver
DQ860MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is
from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with
57mm to 110mm outside diameter and less than 7.8A phase current. This circuit that it adopts is
similar to the circuit of servo control which enables the motor run smoothly almost without noise
and vibration. Hording torque when DQ860MA run under high speed is also significantly higher
than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely
used in middle and big size numerical control devices such as curving machine, CNC machine,
and computer embroider machine, packing machines and so on.
l High performance, low price
l Average current control, 2-phase sinusoidal output current drive
l Supply voltage from 24VDC to 80VDC
l Opto-isolated signal I/O
l Overvoltage, under voltage, overcorrect, phase short circuit protection
l 14 channels subdivision and automatic idle-current reduction
l 8 channels output phase current setting
l Offline command input terminal
l Motor torque is related with speed, but not related with step/revolution
l High start speed
l High hording torque under high speed
Electrical specification:
Input voltage
Input current
< 6A
Output current
Consumption: 80W; Internal Insurance: 10A
Working Temperature -10~45℃;
Stocking temperature -40℃~70℃
Not condensation, no water droplets
Prohibition of combustible gases and conductive dust
Quantity Per Month: 100000
Delivery Way - Date Of Delivery: 3-7

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.


- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB