Solid Red Oak Molding and Panel with V-grooved for Roman Column/Pillar Decoration Use by DIY

One way to hide an unsightly basement support post—whether
it's square, rectangular,or round—is to remove it, right?
This could be a costly adventure!
You could build a box around it, but that can be just as
unattractive as the post. So what do you do? Try column
cover as the photo.

It is constructed of closely set wood strips held together
by a flexible backing. Relief cuts point to the outside,
and the finished surface is laminated with an oak veneer so
it easily wraps a post? And gives it a little class,
especially if column cover has been stained. If painted, it
would blend in beautifully with the rest of the
environment. In a sense you are "beautifying" the post, or
use it as a wall covering.

Solid red oak molding and panel with V-grooved for poles
and columns decoration use by DIY

This panel is available in 8-foot lengths to fit most
standard basement support poles or lally columns.  It is
very easily to installate with normal glue by DIY.
It is the best material with nature wood finishing on
basement support pole,lally columns and shaped decoration.

. Advantage as follows:
  . Glues is easily to pole for beautiful finishing touch.
  . Height & width might be trimmed to fit.
  . Can be stained or painted to match decoration.
  . 48" x 8' sheet can be used as wall covering or cut to
    fit customer surfaces.
  . Installation is easy in DIY.  Simply cut the length
    with a fine tooth saw or miter box, and the width with a
    utility knife.
. Size: 3 mm x 48" x 8' panels with 13 mm or 21 mm width
  V-grooved
. Price: USD 2.80 per sheet FOB Taiwan
. We also supply  solid red oak mold to match the column in
  6", 7" and 8" for 31/2", 4" and 41/2" diameter pole.

Solid red oak molding (two halves)
. Size :
  . 3" top set (6" octagon with 3-1/2" hole) USD 2.90/set
  . 3-1/2" cap set (6" octagon with 4" hole) USD 2.90/set
  . 4" top set (7" octagon with 4-1/2" hole) USD 3.60/set
  . 3" bottom set (7" octagon with 3-1/2?hole) USD 3.60/set
  . 3-1/2" bottom set (7" octagon with 4" hole) USD 3.60/set
  . 4" bottom set (8" octagon with 4-1/2" hole) USD 4.50/set

. Remarks: this products only for the area outside of USA.
  (exclusive base for USA market)

1. Well and High Quality Control
2. New Product
3. Earth-friendly Products
4. ODM Accepted
5. OEM Accepted

100 sheet for panel and 60 to 100 sets per carton for molding

60 days from Taiwan port

60 days after receipt of LC or TT

Column / pole cover, Tambour board, Roma column wrap, wall panel, Roman Pillar