Skymen Chemical Co., Ltd.
Home > Products > Car Maintenance Products > T431 Cooling System Cleaner

T431 Cooling System Cleaner

— car care products, car cleaner, car maintenance products
Product Category: Car Maintenance Products
Sales Method: Export, Manufacture, Wholesale, OEM/ODM, Service
Min. Order Unit Price
negotiable
Contact Info

Mrs.Sophia

Address: China (mainland) Guangdong Shenzhen,Tower a, Ya Ting Building, Ai Lian Street, Longgang District, Shenzhen, Guangdong, China.

Product Detail

Product Attribute:

  • China (mainland) More >
  • T431
  • TREVOR
  • 05/25/2012
  • 05/25/2012

Additional Info.:

  • 30pcs/carton box

Product Content Description:

Car care products/Car cleaner

T431 Cooling System Cleaner

TREVOR Cooling System Cleaner effectively cleans in one simple twenty-minutes operation. Many similar products have to be left in the cooling system for several days, which creates the risk of the user either forgetting or extending the drain and flush time for reasons of convenience. The results can be detrimental and cause expensive, long-term damage to the cooling system and associated components. T431 overcomes this potential risk as the whole cleaning process is completed in one simple operation.

Recommended Uses:

Use T431 before removing a radiator from a vehicle for reconditioning. Clean the entire system with T431 so when the radiator is reinstalled, the core will not be contaminated with scale and residue from the rest of the system.
Use T431 as a complete Cooling System Cleaner to remove insulating built-up sludge and residue before changing coolant in any cooling system. This procedure will ensure optimum heat transfer and efficiency of the entire cooling system.
Whenever draining a cooling system or changing brands of coolant it is always recommended to clean the system with T431.
Directions for Use:
Note: Exercise caution when removing radiator caps. Release pressure slowly to avoid scalding.

Turn on the heater and add required amount of T431 to a warm radiator.
Run the engine for 20 minutes minimum (no longer than 1 hour). Stop the engine and allow it to cool.
Drain the system by removing the bottom radiator hose or opening the drain cock. Thoroughly flush and rinse out all old coolant. Replace the hose or close the drain cock.
Start the engine, check for leaks and top up as necessary.
Application Rates:

All cars and light commercials, add one 100ml bottle
For trucks, tractors and large engines, add 1 bottle for every 6 litres (quarts) of cooling system capacity.
Quantity Per Month: 500,000pcs

Send your inquiry to this supplier

- Your message must be between 20-3000 characters.

Browse

- jpg, jpeg, gif, txt, doc, pdf, xls, docx,xlsx, rar or zip format;
- Max. size of 2MB