Solid Red Oak, Cherry, Maple and Teak panel with V-grooved for Indoor Decoration Use by DIY

Solid red oak, cherry, maple and teak panel with V-grooved
for indoor decoration use by DIY

One way to hide an unsightly basement support post-whether
it's square, rectangular, or round-is to remove it, right?
This could be a costly adventure! You could build a box
around it, but that can be just as unattractive as the
post. So what do you do? Try Pole-Wrap. It is constructed
of closely set wood strips held together by a flexible
backing. Relief cuts point to the outside, and the finished
surface is laminated with an oak veneer so it easily wraps
a post-and gives it a little class, especially if Pole-Wrap
has been stained. If painted, it would blend in beautifully
with the rest of the  environment. In a sense you are
"beautifying" the post. Or use it as a wall covering.

. Products: V-grooved panel
. Size: 4 x 8” with 'V' grove
. Made from high-density MDF board with Oak, cherry,
  aluminum foiled top
. Have different shapes of 'V' groove in 13 mm and 21 mm
. It is very easily to installate with normal glue by DIY.

It is the best material with nature wood finishing on
basement support pole, leally columns, Roma column and
shaped decoration.

Advantage as follows,
. Glues is easily to pole for beautiful finishing touch.
. Height & width might be trimmed to fit.
. Can be stained or painted to match decoration.
. 48" x 8' sheet can be used as wall covering or cut to
  fit customer surfaces.
. Installation is easy in DIY. Simply cut the length
  with a fine tooth saw or miter box, and the width with a
  utility knife.
. Size: 3 mm x 48” x 8” panels with 13 mm or 21 mm width
. V-grooved
. We also supply solid oak mold to match the column in 6",
  7" and 8" for 31/2", 4" and 41/2" diameter pole.
. Solid red oak molding (two halves)
. Size:
. 3” cap set; USD 2.90/set (6” octagon with 3-1/2” hole
  and inside 1/2” radius cut)
. 3-1/2” cap set; USD 2.90/set (6” octagon with 4” hole
  and inside 1/2” radius cut)
. 4” cap set; USD 3.60/set (7” octagon with 4-1/2” hole
  and inside 1/2” radius cut)
. 3” base set; USD 3.60/set (7” octagon with 3-1/2” hole
  and outside 1/2” radius cut)
. 3-1/2” base set; USD 3.60/set (7” octagon with 4” hole
  and outside 1/2” radius cut)
. 4” base set; USD 4.50/set (8” octagon with 4-1/2” hole
  and outside 1/2” radius cut)
. This products only for the area outside of USA.
  (exclusive base for USA market)

1. Well and High Quality Control
2. Prompt Delivery
3. Customer's Designs and Logos are Welcome
4. Competitive Prices
5. In a Variety of Designs
6. ODM Accepted
7. OEM Accepted

. 1/ red oak code no. cy287-01; 3 mm x 4” x 8”;
  USD28.00/sheet
. 2/ teak code no. cy287-86; 3 mm x 4” x 8”;
  USD 33.00/sheet
. 3/cherry code no. cy287-98; 3 mm x 4” x 8”; USD
  31.00/sheet
. 4/maple code no. cy287-99; 3 mm x 4” x 8”; USD
  30.00/sheet

100 sheet per bundle

60 days from Taiwan port

60 days after receipt of LC or TT

tambour board, v-grooved panel, building board, wall panel, column/pole cover