Maximum operating temperature is 250˚F (120˚C)
Lifespan: 1,000,000 times
The counters are installed in the plates in the case of having enough installation...
Both Male and Female Side Locks are Precision Ground for positive alignment for molds with interlocking cavities and cores.
Male is manufactured from a tough tool steel and hardened to 58-60 R/...
Slide core unit
1. Material: S45C,Brass
2. Standard: HASCO, DME, JIS, CUMSA, STRACK, PROGRESSIVE, SUPERIOR etc.and non -standard customize is available
3. Hardness: 58HRC
1. Material: S8620 Steel
2. Standard: Hasco, Misumi, JIS, DME etc. and non-standard customize is available
3. Hardness: 58-62HRC
1. Material: SKD61/SKD11/SKH-9/ASP23/S136 Steel
2. Standard: HASCO,DME,CUMSA,PROGRESSIUE,STRACK,SUPERIOR standard, etc.
3. Hardness: HRC50-54, HRC54-58
4. Type: ZZ174,PPLS,PPLM, P...
1. Material: S136, high-speed steel, special material can customize.
2. Standard: CUMSA, OPITZ, HASCO, DME and non standard customize is available
3. Hardness: SHAN...
HA standard mold base is an off-the-shelf base ready to be machined to your specifications. These moulds are made of steel and alloy and are used for various automotive applications.
Guide Pins are made in high graded Case Hardening Alloy Steel which is having high
Core Strength , Good resistance against wear and tear. Pins are machined, case
hardened, ground and hard chr...
Guide bushing is a round ring or bush which is mounted on the base of a router, with a space for the cutter to pass through it. We manufacture all kinds of guide bush as per market demand.
1. Material: SKD61/SKH51/SKD11
2. Standard: Hasco,DME,Rabourdin etc,and non standard customize is available
3. Diameter size : above 0.7mm(standard type) inch above 3/64