Florex Insulation Cradles

Principle:
In general, for the insulation of carbon steel pipeline
below room temperature, such as chilling water pipe, brine
water pipe, raw material delivery pipe, etc., wood blocks
or polyurethane foam are widely taken as their insulation
cradles. However, due to their rigidity, it is hard for
them to suit the tolerance of carbon steel pipe from
different makers and will cause gap between pipe wall and
cradles, or even can't install the pipe in cradle
completely. It is the reason to cause failure in cold
insulation and what's more, and will cause water
condensation at support point, too. It not only wastes
energy, but also results in severe corrosion problem.

Florex Cradles:
Florex cradle is made from Florex foam, and with the
excellent characters, that is why it is used and designed
for cryogenic piping support purpose. Having the feature
of little flexibility, it can easily overcome the problem
of tolerance from different makers' carbon steel pipes to
hold and support them closely. Florex cradle can really
reach the efficiency of cold insulation without gap left
perfectly and the problem like water condensation and
corrosion will never occur again.

Service Temperature:
. The service temperature range of Florex cradle is from
  -196°C (-322.8°F) to 100°C (212°F)

Features:
. 360° support with 180° cut, it can insulate the contact
  from cryogenic pipe and the metal support beam
  completely.
. It won't suck water into the cell of material.
. It won't be split up under freeze.
. That thickness of insulation requests in any applications
  only needs one layer sleeve.

Application:
1. Chilling water pipeline of air conditioner
2. Liquid ammonia pipeline of refrigerator of seafood
3. LNG, liquid nature gas pipeline
4. Liquid nitrogen delivery pipeline
5. Cryogenic pipeline for industrial use

1. Well and High Quality Control

Electric, Electronic Products, building material, Insulation base, Plastic Foam Products, Packaging Materials, Plastic/Rubber Products & Acc