Diesel Injector Seat Cutter Set

Identify injector "blow-by" exists (see previous page
    for possible symptoms).
Gain access to the injectors and remove them.
Select required reamer onto pilot post and tighten
    internal hex screw.
Place assembled cutter into injector recess.
Using the T bar and socket supplied apply only a small
    amount of pressure whilst turning the cutter in a
    clockwise direction only. Use a small amount of light
    lubricant whilst performing the cut to reduce
    chattering and help give a flat cut. Do not over cut
    the seat only remove enough metal to form a good seat.
Thoroughly clean the seat and remove all swarf.
Fit injectors as per manufacturers instructions.

Kit Contents:
FT-797-01-15 x 19 mm flat reamer for universal injector.
FT-797-02-17 x 17 mm flat reamer for Delphi/Bosch
    injectors (BMW/PSA/Renault/Ford).
FT-797-03-17 x 19 mm flat reamer for Bosch injectors
    (Mercedes CRD).
FT-797-04-17 x 21 mm angled reamer for Fiat/Iveco.
T handle x 1.
Pilot post x 1.

Material: CR-MO

1. Well and High Quality Control
2. New Product
3. Customer's Designs and Logos are Welcome
4. Competitive Prices
5. Small Order Acceptable
6. ODM Accepted
7. OEM Accepted

Delivery Term: FOB

Car Repair Tools, auto repair tools, diesel injector seat cutter set, automotive tools, engine repair tools