Benz & BMW Fan Service Wrench Kit (8 pcs)

. The hardest material, s45c & heat treated
. Shiny surface treatment, just like mirror
. The best quality in the field

H.C.B-A1022-A BMW viscous fan nut wrench (32 mm):
. Removes lock nuts on ermo-viscous fans found on
  Ford, BMW, many vehicles
. NW: 0.42 kg
. Length: 383 mm/hardness: HRC 40 ~ 45

H.C.B-A1022-B BMW pulley holder:
. Allows the technician to hold the water pump pulley
  in place while loosening the radiator fan
. NW: 0.38 kg
. Length: 400 mm/hardness: HRC 40 ~ 45

H.C.B-A1022-C Mercedes Benz fan clutch wrench (65 mm):
. Special open-ended spanner to allow removal and
  replacement of the radiator fan hub
. Application: Mercedes engines m103 (6-cylinder),
  m104 (6-cylinder 4-value), m119 (8-cylinder 4-value),
  m120 (12-cylinder 4-value)
. NW: 0.5 kg
. Length: 395 mm/hardness: HRC 40 ~ 45

H.C.B-A1022-D Benz reaction wrench with 3 holes:
. Required to remove the radiator fan hub, the reaction
  spanner is bolted to the front face of the hub. The
  poly-v belt is not in place and cannot be used to lock
  the hub
. Application: Mercedes C and E class engines m111
  (4-cylinder 4-value), om406 om605 and om606. Slim
  handle for tight space operation
. Length: 410 mm/hardness: HRC 40 ~ 45

H.C.B-A1022-E Benz viscous fan nut wrench (36 mm):
. For undoing the retaining bolt on Mercedes radiator fans
. Applications: Mercedes engines m111, om604, om605
  and om606 (C and E class)
. Length: 343 mm/hardness: HRC 40 ~ 45

H.C.B-A1022-F Benz holding tool:
. To allow removal of the visco-coupling on the cooling
  fan
. Application: On Mercedes engines m103 m104
. Length: 282 mm/hardness: HRC 40 ~ 45

H.C.B-A1022-G Benz fan belt service wrench:
. This universal tool has been designed to service
  Mercedes Benz Nissan quest mercury villager radiator
  fans and pulley belts the three in-one design allows
  servicing three separate areas of repair all of which
  require a specialty tool due to their confined
  locations. This special wrench can be used for
  loosening the A/C idler pulley tensioner lock-nut for
  A/C belt adjustment or replacement 8 mm & 10 mm bit
  included.
. NW: 0.7 kg
. Length: 489.5 mm

H.C.B-A1022-H Benz reaction wrench with 3 holes (o 11.7):
. For holding fan pulley while loosening or tightening
  screws on viscosity fan coupling
. Applicable: M112, 113, 119, .985 (1996-2003)

1. Prompt Delivery
2. New Product
3. Small Order Acceptable

Auto Repair Tools, BMW Repair Tools, Benz Repair Tools, Hand Tools, Engine Repair Tools