Bearing Positioning Tool Set

The bearing positioning tool set provides a convenience way
to contact closely and smoothly with the upper inner edge
of a bearing so that hammering force can be applied evenly
to enable the bearing to be smoothly and quickly assembled
and positioned in the insert hole of an axle.

It includes a grip having an inner end fixed with a
combining rod with a combining hole and 6 pieces heavy-duty
positioning press blocks with different diameters in order
to match different-sized bearings. There are 3 pieces
positioning press blocks are formed with two different
diameters.

Set contains nine sizes:
1. 555" (39.5 mm), 1.752" (44.5 mm), 1.968" (50.0 mm)
2. 322" (59.0 mm), 2.48" (63.0 mm), 2.559" (65.0 mm)
2. 834" (72.0 mm), 2.992" (76.00 mm), 3.189" (81.0 mm)

In using as shown in Figs. 1-3 firstly, pick out a
positioning press block 2 with a suitable diameter and
circumference according to the size of the inner diameter
of a bearing (B) to be assembled.

Next, the combining rod 10 of the grip 1 is inserted
through the central insert hole 20 of the positioning press
block 2 and then the combining member 3 is threadably
combined with the combining threaded hole 11 of the grip 1
to fix the positioning press block 2 in position.

In operating for positioning the bearing (B), as shown in
Figs. 2 and 3, firstly, the positioning press block 2 has
its first fitting member 21 (or the second fitting member
23) closely contacting with the inner wall (B10) of the
bearing (B) and its first holding edge 22 (or the second
holding edge 24) closely and horizontally resting on the
upper edge (B11) of the bearing (B).

Next, the bearing (B) is driven into the insert hole (A) of
an axle by striking the hammering end 12 of the grip 1 with
a hammering tool. Thus, since the positioning press block 2
has its first fitting member 21 and its first holding edge
22 respectively and horizontally contacting closely with
the inner wall (B10) and the upper edge (B11) of the
bearing (B): therefore, the bearing (B) can smoothly and
quickly be assembled and positioned in the insert hole (A)
of an axle.

1. Well and High Quality Control
2. Customer's Designs and Logos are Welcome
3. Competitive Prices
4. Small Order Acceptable

. Taiwan Pat.1294813
. China Pat.ZL 200620148951.4
. U.S.A. Pat.: Pending

AUTO, AUTOMOBILE, CAR, TOOLS, GARAGE